Esky 000863 2.4Ghz, "4 in 1" mix controller

Price: $35.32

Use for

• Honey Bee FP
  

Binding Instructions:

• Unbindind the new receiver 

1. Set transmitter off 
2. Connecting the battery to receiver(or 4 in 1 mix controller)
3. Press the bind keystoke for 1-2 seconds, LED indicator will twinkle constantly, which indicates that unbinding has completed. (as shown in the picture bellow) 

• Rebinding 

1. Disconnect the receiver(or 4 in 1 mix controller)
2. Connect the receiver or 4 in 1 mix controller to the battery,  the LCD indicator twinkles slowly
3. Turn on transmitter, LED on transmitter flashes
4. LED on receiver twinkling slowly to rapidly, and then turns solid, which indicate the binding is successful

(Note: The transmitter only send single code in the first 3 seconds after turned on. If receiver failed binding in 3 seconds, repeat the binding.)